Pacifica Laminate Flooring Installation Guide

Pre-Installation

Before you begin installation, remember to P.A.C.E. yourself with the checklist below.

Acclimation & Environment

48 hours minimum acclimation. Temperature 65°F–85°F, humidity 35%–65%. HVAC must be running for at least 5 days before installation.

Subfloor Requirements

• Flat, clean, dry. Max 3/16" variation over 10 feet.
• Wood: Securely fastened, moisture ≤ 13%
• Concrete: Fully cured (60+ days). Moisture barrier required.

Underlayment & Expansion

Quality underlayment required. On concrete, use moisture barrier underneath. Leave 1/4" to 3/8" expansion gap around all walls and fixed objects.

Floating Click-Lock Installation

Installation Steps

Step 1: Install underlayment. Tape seams securely.

Step 2: Measure room. Ensure last row ≥ 2-1/2" wide.

Step 3: Begin along longest wall with spacers. Cut tongue off first row.

Step 4: Connect planks by angling and clicking. Stagger end joints by at least 12".

Step 5: Use tapping block and rubber mallet. Never strike directly.

Step 6: Rip final row to width. Remove spacers and install baseboards and transitions.

Care & Maintenance

• Sweep or vacuum regularly. Damp mop with laminate-specific cleaner.
• Do NOT use wet mops, steam mops, or excessive water.
• Wipe up spills immediately. Use felt pads under furniture.
• Maintain temperature 65°F–85°F, humidity 35%–65%.